Article Sidebar
Main Article Content
Abstract
This research aims to implement the concept of Green Productivity through wood waste processing to optimize productivity and environmental performance at PT Sinar Indah Furniture. In the furniture industry, wood waste is one of the major issues affecting environmental sustainability and production efficiency. The research method used in this study is descriptive analysis with a quantitative approach to evaluate the company’s productivity before and after the implementation of wood waste processing. The results of the study show that the company’s productivity experienced fluctuations during the observation period, but by processing wood waste into economically valuable products, such as particle boards, the company was able to reduce the generated waste and improve productivity. Additionally, the implementation of green productivity has the potential to enhance environmental performance by reducing the negative impact caused by wood waste. This study concludes that the implementation of green productivity not only brings environmental benefits but also increases the company’s economic value. Based on the results, it is recommended to continue the broader implementation of these practices to support the sustainability of the furniture industry in Indonesia
Keywords
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
By exercising the Licensed Rights, You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-NonCommercial 4.0 International Public License.
References
- Ahmad Sofyan. (2023). PEMANFAATAN LIMBAH KAYU DENGAN MENGGUNAKAN METODE GREEN PRODUCTIVITY PADA UD. DONGAN SAHUTA MEDAN.
- https://repositori.uma.ac.id/handle/123456789/19717
- Citraresmi, A. D. (2023). Implementation of green productivity as an effort to increase productivity and environmental performance of milk agroindustry. AIP Publishig. https://doi.org/10.1063/5.0119228
- Elvis Umbu Lolo, R. I. (2021). Penilaian Dampak Lingkungan Industri Tahu Menggunakan Life Cycle Assessment Assessment (Studi Kasus: Pabrik Tahu Sari Murni Kampung Krajan, Surakarta). Jurnal Serambi Engineering, Vol 6, No 4. https://doi.org/10.32672/jse.v6i4.3480
- Farhan, F. (2023). Pengukuran Produktivitas menggunakan Metode Green Produktiviti untuk Meningkatkan Produktivitas dalam Penanganan Limbah Cair di PT Gensap Makmur Sejahtera. Jurnal BSI IMTECHNO, Vol. 4 No. 2.
- Ghiffari Zaka Wali, W. H. (2022). Analisis Kinerja Lingkungan dengan Metode Green Productivity pada Limbah Cair Pabrik Tahu FN Gresik. Al-Kharaj: Jurnal Ekonomi, Keuangan & Bisnis Syariah, Volume 4 No 4, 1227-1239.
- Handayani, M. S. (2023). Environmental Performance Analysis Using the Green Productivity Method on Convection Waste Baper Shop Surabaya. International Journal of Business and Applied Economics (IJBAE), Vol. 2, No. 5, 2023: 803-818.
- Herdian Dwimas, e. a. (2023). PENINGKATAN PRODUKTIVITAS DAN KINERJA LINGKUNGAN PADA INDUSTRI KAYU MENGGUNAKAN METODE GREEN PRODUCTIVITY. Wicida Sebatik, Vol. 27 No. 1 .
- Hidayat, R. (2019). Waste Management and Green Productivity in Increased Productivity and Environmental Performance. International Journal of GEOMATE , 16(55).
- Hidup, K. K. (2023). Sistem Informasi Pengelolaan Sampah Nasional. Retrieved from https://sipsn.menlhk.go.id/sipsn/public/data/komposisi#parallax
- Indriyani, R. (2021). PENGARUH KINERJA LINGKUNGAN TERHADAP KINERJA KEUANGAN DENGAN CORPORATE SOCIAL RESPONSIBILITY SEBAGAI VARIABEL INTERVENING (Studi pada Perusahaan Manufaktur yang terdaftar di BEI periode 2017-2019). REPOSITORY STIE JAKARTA.
- Kodrat, K. F. (2023). Peningkatan Produktivitas Dan Kinerja Lingkungan Dengan Pendekatan Green Productivity Pada Industri Tahu Di Kecamatan Mabar Medan. Jurnal UISU.
- Mu’alim, R. H. (2019). WASTE MANAGEMENT ANDGREEN PRODUCTIVITYIN INCREASED PRODUCTIVITY AND ENVIRONMENTALPERFORMANCE. International Journal of GEOMATE, 145-152.
- (2024, March 05). Retrieved from CNBC: https://www.cnbcindonesia.com/news/20240305185933-8-519917/video-prospek-industri-furniture-untuk-perekonomian-indonesia
- Mukti, L. (2023). PENINGKATAN PRODUKTIVITAS DAN KINERJA LINGKUNGAN PADA INDUSTRI KAYU MENGGUNAKAN METODE GREEN PRODUCTIVITY. Sebatik, Vol. 27 No. 1.
- Muslimah, E. (2020). Waste Reduction in Green Productivity in Small and Medium-Sized Enterprises of Kampoeng Batik Laweyan. International Journal of Emerging Trends in Engineering Research, 8(6):2360-2364.
- Prasetyo, G. (2020). Inovasi Pengolahan Limbah Industri Mebel Guna Menambah Pendapatan Perusahaan (Studi Kasus UD. Berkah Mebel). Repository Universitas Kadiri.
- Ruben Ferdian, N. E. (2024). HUBUNGAN PAPARAN DEBU KAYU DENGAN PERMASALAHAN SISTEM RESPIRASI PADA PEKERJA INDUSTRI MEBEL: SEBUAH TINJAUAN. Media Ilmiah Kesehatan Indonesia, Vol. 2 No. 3 .
- Septifani, R. (2020). Green productivity analysis of tempeh chips production. IOP Conference Series: Earth and Environmental Science.
- Wulandari, P. D. (2021). ANALISIS PRODUKTIVITAS DAN KINERJA LINGKUNGAN RUMAH POTONG AYAM DENGAN PENDEKATAN GREEN PRODUCTIVITY (Studi kasus RPA Madani). Repository Unhas.